GFRP / GFK (Glass Fiber Reinforced Epoxy) vs PA12 (Nylon 12): 0% composition overlap. Significantly different materials serving different application areas.
GFRP / GFK (Glass Fiber Reinforced Epoxy) vs PA12 (Nylon 12)
Side-by-side chemical composition and mechanical property comparison.
Overview
GFRP / GFK (Glass Fiber Reinforced Epoxy)
Glass fiber reinforced epoxy composite — the cost-effective structural composite for industrial, marine and construction applications. E-glass fiber in epoxy matrix. Unidirectional: UTS ~1000 MPa, E ~40 GPa. Quasi-isotropic layup: UTS ~300 MPa, E ~18 GPa. Density 1.8–2.1 g/cm³. Electrically insulating (unlike CFRP). Used for boat hulls, wind turbine blades, chemical tanks/pipes, architectural panels, ladders, gratings, automotive body panels and electrical insulation structures.
PA12 (Nylon 12)
Polyamide 12 — the long-chain polyamide with the lowest moisture absorption of all PA grades (0.1-0.15% vs PA6: 1.5%). Excellent dimensional stability in humid environments. Best chemical resistance among polyamides (oils, fuels, hydraulic fluids). Lowest density of all PA (1.01 g/cm³). Also the dominant 3D printing (SLS/MJF) material. Trade names include Rilsamid (Arkema), Grilamid L (EMS), TECAMID 12 (Ensinger), Vestamid L (Evonik). Used for fuel lines, brake lines, pneumatic tubing, cable sheathing, and 3D-printed functional parts.
| GFRP / GFK (Glass Fiber Reinforced Epoxy) | PA12 (Nylon 12) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ASTM D3039 | ISO 10350 |
Mechanical properties
| Property | GFRP / GFK (Glass Fiber Reinforced Epoxy) | PA12 (Nylon 12) | Unit |
|---|---|---|---|
| Tensile Strength | 900–1100 | — | MPa |
| Tensile Modulus | 38–45 | — | GPa |
| Density | 1.8–2.1 | — | g/cm³ |
Compatibility Assessment
GFRP / GFK (Glass Fiber Reinforced Epoxy) and PA12 (Nylon 12) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is GFRP / GFK (Glass Fiber Reinforced Epoxy) the same as PA12 (Nylon 12)?
GFRP / GFK (Glass Fiber Reinforced Epoxy) and PA12 (Nylon 12) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace GFRP / GFK (Glass Fiber Reinforced Epoxy) with PA12 (Nylon 12)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between GFRP / GFK (Glass Fiber Reinforced Epoxy) and PA12 (Nylon 12)?
The main differences are in the following elements: overall alloying content. GFRP / GFK (Glass Fiber Reinforced Epoxy) is a Polymers grade, while PA12 (Nylon 12) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.