GFRP / GFK (Glass Fiber Reinforced Epoxy) vs PA6 GF30: 0% composition overlap. Significantly different materials serving different application areas.
GFRP / GFK (Glass Fiber Reinforced Epoxy) vs PA6 GF30
Side-by-side chemical composition and mechanical property comparison.
Overview
GFRP / GFK (Glass Fiber Reinforced Epoxy)
Glass fiber reinforced epoxy composite — the cost-effective structural composite for industrial, marine and construction applications. E-glass fiber in epoxy matrix. Unidirectional: UTS ~1000 MPa, E ~40 GPa. Quasi-isotropic layup: UTS ~300 MPa, E ~18 GPa. Density 1.8–2.1 g/cm³. Electrically insulating (unlike CFRP). Used for boat hulls, wind turbine blades, chemical tanks/pipes, architectural panels, ladders, gratings, automotive body panels and electrical insulation structures.
PA6 GF30
Polyamide 6 with 30% short glass fiber reinforcement — the industry standard for metal replacement in structural injection-molded parts. UTS doubles vs unfilled PA6 (175 vs 80 MPa), stiffness triples (E-Mod 9.5 vs 3.0 GPa), and HDT jumps to 200°C+. The classic materialref.com differentiation case: Ultramid B3WG6 (BASF) = Zytel 73G30 (DuPont) = Durethan BKV 30 (LANXESS) = Akulon K224-G6 (DSM) = Grilon BG-30 (EMS) = Technyl C216 V30 (Domo) — all the same base material. Used for automotive brackets, engine covers, power tool housings, electrical connectors, and structural inserts.
| GFRP / GFK (Glass Fiber Reinforced Epoxy) | PA6 GF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ASTM D3039 | ISO 10350 |
Mechanical properties
| Property | GFRP / GFK (Glass Fiber Reinforced Epoxy) | PA6 GF30 | Unit |
|---|---|---|---|
| Tensile Strength | 900–1100 | — | MPa |
| Tensile Modulus | 38–45 | — | GPa |
| Density | 1.8–2.1 | — | g/cm³ |
Compatibility Assessment
GFRP / GFK (Glass Fiber Reinforced Epoxy) and PA6 GF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is GFRP / GFK (Glass Fiber Reinforced Epoxy) the same as PA6 GF30?
GFRP / GFK (Glass Fiber Reinforced Epoxy) and PA6 GF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace GFRP / GFK (Glass Fiber Reinforced Epoxy) with PA6 GF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between GFRP / GFK (Glass Fiber Reinforced Epoxy) and PA6 GF30?
The main differences are in the following elements: overall alloying content. GFRP / GFK (Glass Fiber Reinforced Epoxy) is a Polymers grade, while PA6 GF30 is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.