GFRP / GFK (Glass Fiber Reinforced Epoxy) vs PEEK (unfilled): 0% composition overlap. Significantly different materials serving different application areas.
GFRP / GFK (Glass Fiber Reinforced Epoxy) vs PEEK (unfilled)
Side-by-side chemical composition and mechanical property comparison.
Overview
GFRP / GFK (Glass Fiber Reinforced Epoxy)
Glass fiber reinforced epoxy composite — the cost-effective structural composite for industrial, marine and construction applications. E-glass fiber in epoxy matrix. Unidirectional: UTS ~1000 MPa, E ~40 GPa. Quasi-isotropic layup: UTS ~300 MPa, E ~18 GPa. Density 1.8–2.1 g/cm³. Electrically insulating (unlike CFRP). Used for boat hulls, wind turbine blades, chemical tanks/pipes, architectural panels, ladders, gratings, automotive body panels and electrical insulation structures.
PEEK (unfilled)
Polyetheretherketone — the premium engineering thermoplastic. Exceptional mechanical properties maintained to 260°C continuous use. Resistant to virtually all organic solvents and acids. Biocompatible (ASTM F2026). Used as metal replacement in aerospace, automotive engine parts, medical implants (spinal cages), semiconductor wafer handling, and oil/gas downhole seals.
| GFRP / GFK (Glass Fiber Reinforced Epoxy) | PEEK (unfilled) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ASTM D3039 | ISO 10350 |
Mechanical properties
| Property | GFRP / GFK (Glass Fiber Reinforced Epoxy) | PEEK (unfilled) | Unit |
|---|---|---|---|
| Tensile Strength | 900–1100 | — | MPa |
| Tensile Modulus | 38–45 | — | GPa |
| Density | 1.8–2.1 | — | g/cm³ |
Compatibility Assessment
GFRP / GFK (Glass Fiber Reinforced Epoxy) and PEEK (unfilled) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is GFRP / GFK (Glass Fiber Reinforced Epoxy) the same as PEEK (unfilled)?
GFRP / GFK (Glass Fiber Reinforced Epoxy) and PEEK (unfilled) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace GFRP / GFK (Glass Fiber Reinforced Epoxy) with PEEK (unfilled)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between GFRP / GFK (Glass Fiber Reinforced Epoxy) and PEEK (unfilled)?
The main differences are in the following elements: overall alloying content. GFRP / GFK (Glass Fiber Reinforced Epoxy) is a Polymers grade, while PEEK (unfilled) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.