PA12 (Nylon 12) vs PA6-GF15: 0% composition overlap. Significantly different materials serving different application areas.
PA12 (Nylon 12) vs PA6-GF15
Side-by-side chemical composition and mechanical property comparison.
Overview
PA12 (Nylon 12)
Polyamide 12 — the long-chain polyamide with the lowest moisture absorption of all PA grades (0.1-0.15% vs PA6: 1.5%). Excellent dimensional stability in humid environments. Best chemical resistance among polyamides (oils, fuels, hydraulic fluids). Lowest density of all PA (1.01 g/cm³). Also the dominant 3D printing (SLS/MJF) material. Trade names include Rilsamid (Arkema), Grilamid L (EMS), TECAMID 12 (Ensinger), Vestamid L (Evonik). Used for fuel lines, brake lines, pneumatic tubing, cable sheathing, and 3D-printed functional parts.
PA6-GF15
Polyamide 6 with 15% short glass fiber reinforcement — moderate stiffness increase (E-Mod ~5.5 GPa vs 2.7 unfilled) while retaining good impact strength and elongation. Better toughness than higher-filled grades (GF30, GF50). Trade names: Ultramid B3EG3 (BASF), Zytel 73G15 (DuPont). Used for structural clips, housings, brackets, and under-hood automotive parts where moderate stiffness with good impact is needed.
| PA12 (Nylon 12) | PA6-GF15 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 10350 | ISO 527-1 |
Mechanical properties
| Property | PA12 (Nylon 12) | PA6-GF15 | Unit |
|---|---|---|---|
| tensile_strength | 45–60 | 100–115 | MPa |
| yield_strength | 40–50 | — | MPa |
| elongation | 100–300 | 4–6 | % |
Compatibility Assessment
PA12 (Nylon 12) and PA6-GF15 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is PA12 (Nylon 12) the same as PA6-GF15?
PA12 (Nylon 12) and PA6-GF15 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace PA12 (Nylon 12) with PA6-GF15?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between PA12 (Nylon 12) and PA6-GF15?
The main differences are in the following elements: overall alloying content. PA12 (Nylon 12) is a Polymers grade, while PA6-GF15 is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.