EN AW-6082 vs EN AW-6082: 100% composition overlap. Very similar materials, likely interchangeable for most applications.
EN AW-6082 vs EN AW-6082
Side-by-side chemical composition and mechanical property comparison.
Overview
EN AW-6082
3.2315
High-strength structural aluminium alloy in the Al-Mg-Si family. One of the strongest 6xxx series alloys due to manganese addition. Replaced 6061 in many European applications. Used for trusses, bridges, cranes, transport, scaffolding, and marine applications. Heat treatable (T6/T651).
EN AW-6082
3.2315
THE European structural aluminum alloy — AlSi1MgMn. Highest strength in the 6xxx series (UTS 310 T6). Excellent machinability, good weldability (but HAZ softening), and good corrosion resistance. THE default choice for structural aluminum in Europe — equivalent to what 6061 is in the US. Used for bridges, cranes, transport structures, offshore, and machined components.
| EN AW-6082 | EN AW-6082 | |
|---|---|---|
| Material Number | 3.2315 | 3.2315 |
| Category | Aluminum | Aluminum |
| Standard | EN 573-3 | EN 755-2 |
Chemical composition (wt%)
| Element | EN AW-6082 | EN AW-6082 | Overlap |
|---|---|---|---|
| Si | 0.7–1.3% | 0.7–1.3% | OK |
| Mn | 0.4–1% | 0.4–1% | OK |
| Cr | 0–0.25% | 0–0.25% | OK |
| Cu | 0–0.1% | 0–0.1% | OK |
Mechanical properties
| Property | EN AW-6082 | EN AW-6082 | Unit |
|---|---|---|---|
| tensile_strength | ≥ 310 | 290–340 | MPa |
| yield_strength | ≥ 260 | 250–290 | MPa |
| elongation | ≥ 8 | 8–10 | % |
Compatibility Assessment
EN AW-6082 and EN AW-6082 have very similar compositions (100% overlap) and are likely interchangeable for most applications. Verify mechanical properties for your specific use case.
Automated assessment based on composition analysis
Frequently Asked Questions
Is EN AW-6082 the same as EN AW-6082?
EN AW-6082 and EN AW-6082 have a 100% composition overlap. For most purposes, they can be considered similar.
Can I replace EN AW-6082 with EN AW-6082?
In many cases, yes. The compositions overlap significantly (100%). However, always verify mechanical property requirements and heat treatment compatibility for your specific application.
What is the difference between EN AW-6082 and EN AW-6082?
The main differences are in the following elements: overall alloying content. EN AW-6082 is a Aluminum grade, while EN AW-6082 is a Aluminum grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.